Fire Door Rating Validation in BIM: Checking FireRating in Your IFC Model

· 4 min read · By Verify AI

To validate fire door ratings in BIM, check that every door on an exit route has a FireRating value, that the format is consistent, and that the rating matches the wall it sits in. In IFC the value lives in the standard property set Pset_DoorCommon, so a checker can read it directly, if your team filled it in.

Unverified door ratings are a frequent comment on fire submissions. They are also among the easiest to catch in a model.

Where the rating lives in IFC

The standard property set Pset_DoorCommon applies to IfcDoor and includes these properties relevant to fire:

Property Meaning
FireRating Fire rating of the door assembly, recorded as a text label
FireExit Whether the door serves as an exit in case of fire
SelfClosing Whether the door closes by itself
SmokeStop Whether the door is designed to resist smoke

The wall's rating sits in Pset_WallCommon.FireRating. A door "fills" an opening in a wall, so a checker can compare the two. buildingSMART guidance is to use these standard properties rather than create custom ones.

What codes expect (in general terms)

  • Doors in protected stair enclosures, lift lobbies, shafts and compartment walls carry a fire rating, normally matched to the element they sit in.
  • Rated doors are expected to be self-closing.
  • NBCS 2026 guidance moves toward certified fire door assemblies, meaning frame, leaf, hardware and intumescent seals evaluated together from an accredited manufacturer, and away from uncertified metal doors.

The rating value itself comes from the code edition and the authority. A check should always tell you which edition and clause it used.

Five mistakes that cause comments

  1. Blank or placeholder values. FireRating empty, or set to "N/A" on doors that need a rating.
  2. Mixed formats. "FD30", "30 min" and "0.5 hr" for the same rating cannot be compared automatically.
  3. Type vs instance confusion. The rating is on the door type in one model and the instance in another, so tools read different values.
  4. Door lower than the wall. A lower-rated door in a rated stair enclosure wall.
  5. Schedule and model disagree. Doors in the schedule that are not in the model, or the reverse.

A fix-it workflow

  1. Choose one format. For example minutes, written the same way everywhere.
  2. Use the standard property. Map your authoring parameter to Pset_DoorCommon.FireRating in the export settings.
  3. List the doors that matter. Doors to stairs, lift lobbies, shafts and compartment walls.
  4. Fill and match. Set the rating and confirm it against the host wall.
  5. Reconcile with the schedule before you submit.
  6. Attach evidence. Keep the manufacturer's test evidence for certified assemblies.

What automation can and cannot do

A model check can confirm a rating is recorded, consistent and matched to the wall, and report the clause it used. It cannot confirm that the physical product is certified. That evidence comes from the manufacturer and goes in your submission. See the fire door rating validation check for the example finding.

Frequently asked questions

Where is the fire rating stored in an IFC model?

In Pset_DoorCommon.FireRating on the IfcDoor or its type, as a text label.

What rating must a stair door have?

It depends on the code edition and authority. Use the figure in the edition your authority applies, and cite the clause.

Should the door and wall ratings match?

Usually the door is expected to match the rating of the element it is in. Check the requirement in your code.

Can software tell if a door is certified?

It can check the rating and consistency. Certification evidence comes from the manufacturer's tests.

Check every door in one pass

Verify AI checks door ratings against the wall they sit in and reports the element, location and clause. Download the IFC validation matrix or see the sample report.

Sources

Property definitions follow buildingSMART IFC documentation; confirm details for the IFC version you export.

← All articles · Try Verify AI